🧰 User Guide – Duracell 1500L Work Light

Below is a summary of the key information for your work light. You can download the full manual at the bottom of this page for more details.

Item  1806380

---

Key Features

1. Brightness Settings:
   Press power button to toggle through modes
   • High: 1500 lumens - Up to 1.5 hours
   • Medium: 500 lumens - Up to 4 hours
   • Low: 200 lumens - Up to 9 hours
   • Nightlight/ High: 100 Lumens - Up to 9 hours
   • Nightlight/ Low: 50 Lumens - Up to 18 hours
2. Rechargeable Battery:
   • Built-in lithium-ion battery, rechargeable via USB-C.
3. Magnetic Base:
   • For secure attachment to metal surfaces.
4. Swivel Head:
   • Adjustable to direct light exactly where needed.
5. Water Resistance:
   • Rated IPX4, splash-resistant.

---

Charging the Work Light

1. Connect the Charger:
   • Plug the included USB-C cable into the IN port on the back of the work light.
   • Connect the other end to a 5V/1A wall adapter (not included).
   • The USB-C OUT port is available to charge other devices (Cable for charging other devices and phone is not included). 
2. Charging Indicators:
   • The LED indicator shows battery progress:
     • 1 Light: 25% charged.
     • 2 Lights: 50% charged.
     • 3 Lights: 75% charged.
     • 4 Lights: Fully charged (100%). 

Estimated recharge time is 4 hours.

---

Using the Work Light

1. Turning On/Off:
   • Press the main power button to turn the work light on or off.
2. Switching Brightness Modes:
   • Press the power button repeatedly to cycle through High, Medium, and Low modes.
3. Swivel and Magnetic Base:
   • Adjust the swivel head for precise lighting.
   • Attach the magnetic base to any metal surface for hands-free use.

---

Battery Maintenance

• Fully charge the battery before the first use.
• Avoid storing or operating the work light in extreme temperatures.
• For long-term storage, partially charge the battery before putting the unit away.

---

Power Lock Mode

-Flashes and turns off? Powerlock mode is used to preserve battery life when stored or in transit.-

• Enable Power Lock: Hold the power button for 5 seconds until the light flashes. Prevents accidental activation during transport or storage.
• Disable Power Lock: Hold the power button again for 5 seconds until the light flashes.

---

Safety Guidelines

• Avoid looking directly into the light when it’s on.
• Operate the work light within the temperature range: -20°C to 54°C (-4°F to 129.2°F).
• Do not disassemble or expose the work light to rain or submersion.

---

Troubleshooting

1. Work Light Won’t Turn On:
   • Ensure the battery is fully charged.
   • Check the charging port for debris.
   • Reset the light by disconnecting and reconnecting the battery.
2. Charging Issues:
   • Confirm the charger is properly connected to the IN port.
   • Ensure the adapter is 5V/1A and the USB-C cable is functional.

---

Looking for more details? Find your product and download the full manual here: Duracell Lights Product Manuals.