Hereโs a quick summary of key details for your headlamp. Need more information? Find your product and download the full manual here: Duracell Lights Product Manuals.
7180-DH350 Headlamp Manual Breakdown
1. Key Features
-
Brightness Modes:
- High Mode: 350 lumens, 3 hours runtime, 60 meters beam distance.
- Low Mode: 35 lumens, 15 hours runtime, 10 meters beam distance.
-
Focusing Beam:
- Adjustable beam for precise control of the light direction and width.
-
Battery Type:
- Uses 3 AAA batteries (Duracell included).
-
Water Resistance:
- Rated IPX4, meaning it can withstand splashes but should not be submerged.
-
Adjustable Beam Angle:
- The headlamp can tilt to direct light where needed.
2. Operating Instructions
-
Turning On/Off:
- Press the power button once to turn the headlamp on or off.
-
Switching Modes:
- Quick press the power button to cycle through modes:
- High Mode โ Low Mode โ Off.
- Quick press the power button to cycle through modes:
-
Adjusting the Beam:
- Use the focusing ring on the front of the headlamp to adjust the beam width and direction.
-
Adjusting the Beam Angle:
- Manually tilt the headlamp for better light positioning.
3. Battery Information
-
Installation:
- Open the battery compartment by sliding the cover.
- Insert 3 AAA batteries with the correct polarity (+/-).
- Close the cover securely.
-
Battery Safety:
- Do not mix old and new batteries or different brands.
- Remove batteries if the headlamp will not be used for an extended period to prevent leakage or corrosion.
4. Safety Guidelines
- Avoid shining the light directly into eyes to prevent discomfort or temporary blindness.
- Keep the headlamp out of reach of children.
- Use only the recommended battery type to avoid damage.
5. Maintenance
- Clean the headlamp with a soft, damp cloth after use.
- Store in a cool, dry place when not in use.
- Avoid submerging the headlamp in water, as it is splash-resistant but not waterproof.
6. Troubleshooting
-
If the headlamp doesnโt turn on:
- Check the battery orientation (+/-).
- Replace the batteries if necessary.
- Clean the battery compartment to ensure proper contact.
-
If the focusing beam doesnโt adjust properly:
- Ensure the focusing ring is free of debris and rotates smoothly.
- Ensure the focusing ring is free of debris and rotates smoothly.
Comments
0 comments
Article is closed for comments.