🔆 User Guide – Duracell 250L Headlamp

Here’s a quick summary of key details for your headlamp. Need more information? Find your product and download the full manual here: Duracell Lights Product Manuals.

---

7173-DH250 Headlamp Manual Breakdown

1. Key Features

• Brightness Modes:

  • High Mode: 250 lumens, 4 hours runtime, 50 meters beam distance.
  • Low Mode: 30 lumens, 15 hours runtime, 10 meters beam distance.
  • Red Light Mode: Preserves night vision, runtime varies.

• Motion Activation:

  • Turns the headlamp on/off with a simple wave in front of the sensor.

• Battery Type:

  • Uses 3 AAA batteries (Duracell included).

• Water Resistance:

  • Rated IPX4, meaning it can withstand splashes from any direction but should not be submerged.

• Adjustable Beam Angle:

  • The headlamp can tilt to direct light where needed.

---

2. Operating Instructions

1. Turning On/Off:

   • Press the power button once to turn the headlamp on or off.

2. Switching Modes:

   • Quick press the power button to cycle through modes:
     • High Mode → Low Mode → Red Light Mode → Off.

3. Activating Motion Sensor Mode:

   • Press and hold the power button for 2-3 seconds to activate motion mode. Wave your hand in front of the headlamp to turn it on/off.

4. Adjusting the Beam Angle:

   • Manually tilt the headlamp to adjust the light beam direction.

---

3. Battery Information

• Installation:

  1. Open the battery compartment by sliding the cover.
  2. Insert 3 AAA batteries with the correct polarity (+/-).
  3. Close the cover securely.

• Battery Safety:

  • Do not mix old and new batteries or different brands.
  • Remove batteries if the headlamp will not be used for an extended period to prevent leakage or corrosion.

---

4. Safety Guidelines

• Avoid shining the light directly into eyes to prevent discomfort or temporary blindness.
• Keep the headlamp out of reach of children.
• Use only the recommended battery type to avoid damage.

---

5. Maintenance

• Clean the headlamp with a soft, damp cloth after use.
• Store in a cool, dry place when not in use.
• Avoid submerging the headlamp in water, as it is splash-resistant but not waterproof.

---

6. Troubleshooting

1. If the headlamp doesn’t turn on:

   • Check the battery orientation (+/-).
   • Replace the batteries if necessary.
   • Clean the battery compartment to ensure proper contact.
     
     

2. If the motion sensor doesn’t work:

   • Ensure there is no dirt or debris blocking the sensor.
   • Replace the batteries to ensure sufficient power for the motion function.