🔦 User Guide – Infinity X1 7000L Flashlight

Below is a summary of the key information for your flashlight. You can download the full manual at the bottom of this page for more details.

---

Charging the Flashlight

For best results, fully charge the flashlight before use.

1. Charging Indicator:
   • Remove the battery pack from the flashlight for a clear view of the charging indicator light near the USB-C IN port.
   • Red Light: Charging in progress.
   • Green Light: Fully charged.

2. Battery Level Indicators (Color Ring):

   Your flashlight shows charge level through the color ring around the power button:

   • 🟢 Green: 72–100% (Full)
   • 🟠 Orange: 37–71% (Medium)
   • 🔴 Red: 6–36% (Low)
   • 🔴 Blinking: 5% or less – Recharge soon
3. Ports:
   • IN-port: Use this port to charge the flashlight without removing the battery (USB-C cable included).
   • OUT-port: Use this port to charge external devices like phones (cable not included).
4. Port Alignment:
   • Ensure the IN-port on the battery pack aligns with the flashlight’s IN-port when reattaching the battery pack.
5. Charging Cube:
   • Use a 5V/2A charging cube (not included) for optimal charging.

---

Power Lock & Try Me (Demo) Mode

• Purpose: Limits flashlight functionality to preserve battery life during storage or transit.
• Power Lock: The small slide switch above the power button controls Power Lock:
  • Left (Lock symbol): Power Lock ON – prevents accidental activation
  • Right (Unlocked symbol): Power Lock OFF – normal operation (Make sure it’s in the unlocked position before turning the flashlight on.)
• Try Me (Demo) Mode: When TRY ME mode is ON, the flashlight will cycle through modes, flash briefly, and then shut off. To disable TRY ME mode:

1. Make sure the flashlight is off.
2. Press and hold the power button for 3–5 seconds until the light turns on and stays on.

You can now use all modes normally. To re-enable TRY ME mode, repeat the same step while the light is off.

---

Power Options

• Rechargeable Battery: Best for regular use, long-term savings, and reduced environmental impact.
• Alkaline Batteries: Ideal for emergencies or when recharging is not possible. Store in a cool, dry place to avoid corrosion.

---

Light Modes

• High Mode: Maximum brightness

  • Rechargeable Batteries: 7000 lumens –  Up to 1.5 hours.

  • Alkaline Batteries: 1200 lumens – Up to 2.5 hours.

• Medium Mode: Balanced brightness and runtime

  • Rechargeable Batteries: 3000 lumens –  Up to 3.5 hours.

  • Alkaline Batteries: 750 lumens – Up to 5 hours.

• Low Mode: Reduced brightness for everyday tasks and longer use between charges.

  • Rechargeable Batteries: 700 lumens –  Up to 11 hours.

  • Alkaline Batteries: 500 lumens – Up to 7.5 hours.

• Eco Mode: Energy-efficient mode for extended runtime

  • Rechargeable Batteries: 400 lumens –  Up to 18 hours.

  • Alkaline Batteries: 300 lumens – Up to 12 hours.

To Switch Modes: This model uses two buttons:

• Power Button: Turns the flashlight on and off
• Mode (“M”) Button: Cycles through brightness levels

---

Safety Guidelines

1. Avoid shining the light directly into eyes.
2. Operate within the recommended temperature range: -20°C to 54°C (-4°F to 129.2°F).
3. Do not mix rechargeable and alkaline batteries in the flashlight.
4. Do not mix old and new batteries in the flashlight.

---

Maintenance

• Clean the flashlight with a soft, damp cloth after use.
• Store in a cool, dry place when not in use.
• Remove batteries when storing for extended periods to prevent leakage or corrosion.

---

Warranty and Registration

1. Visit https://myproduct.infinityx1.com/.
2. Click "REGISTER MY PRODUCT" and complete the form.
3. The warranty is active even if the status says "Status Requested."

---

Additional Information

1. Magnetic Base: The flashlight has a strong magnetic base for hands-free use on metal surfaces.
2. Water Resistance: Rated IPX4, making it splash-resistant but not submersible.

---

Looking for more details? Find your product and download the full manual here: Infinity X1 Product Manuals.