⚪️ User Guide – Infinity X1 Under Cabinet Light

This guide walks you through charging, zoning, controls, motion settings, and installation for your Infinity X1 Under-Cabinet Lights.

Important – Read This First

Your lights already come linked

The lights and remote come pre-linked from the factory. This means they are already able to communicate with each other and do not require pairing for basic use.

Zoning is different from linking.
Zoning determines which lights operate together when using the remote.

---

1. Charging Instructions (Start Here)

Charging the Lights

1. Use the included USB-C cable.

2. Plug the cable into the USB-C port on the side of each light.

3. Connect the other end to a USB power source (wall adapter not included).

Charging Indicator:

• 🔴 Red light – Charging

• 🟢 Green light – Fully charged

➡️ Fully charge all lights before first use.

---

Charging the Remote Control

1. Plug the USB-C cable into the remote.

2. Connect to a USB power source.

Remote Indicator:

• 🔴 Red – Charging

• 🟢 Green – Fully charged

---

2. Understanding Zones vs. Linking (Very Important)

• Linked = The lights and remote can communicate (already done at the factory).

• Zoned = Controls which lights operate together.

If you want multiple lights to turn on, dim, and respond together, you must zone them together.

---

3. If You Want All Lights to Operate Together (Zoning Them Together)

Step 1: Set the Zone on Each Light

On the back of each light, locate the Zone toggle switch:

• OFF – Light will not respond to the remote

• 1 – Assigns the light to Zone 1

• 2 – Assigns the light to Zone 2

➡️ Set every light you want operating together to the same zone (1 or 2).

---

Step 2: Match the Zone on the Remote

On the remote, locate the Zone selector at the top:

• ALL – Controls Zone 1 and Zone 2

• 1 – Controls Zone 1 only

• 2 – Controls Zone 2 only

➡️ Select the zone that matches the lights you want to control.

---

Step 3: Enable Remote Control on Each Light

On the back of each light, set:

• REMOTE → ON

This allows the remote to control the light.

---

Example

• Want all under-cabinet lights to operate together?

  • Set all lights to Zone 1

  • Set remote to Zone 1 or ALL

• Want two areas controlled separately?

  • Assign one group to Zone 1

  • Assign the other group to Zone 2

  • Switch zones on the remote as needed

---

4. Light Controls & Modes (On the Light Itself)

All controls are located on the control panel on the back of each light.

Color Temperature Button (Top Left of the Control Panel)

• The top-left button controls color temperature.

• Press once to cycle through:

  • Warm light

  • Neutral light

  • Cool light

Each press changes the color temperature to the next setting.

---

Dimming Function (Same Top-Left Button)

• Press and hold the top-left button to adjust brightness.

• Holding the button will smoothly dim the light brighter or dimmer.

➡️ Release the button when the desired brightness is reached.

---

5. Motion Sensor Settings

The motion sensor only activates in darkness.

Motion Sensor Distance (Back of Light)

• OFF – Motion sensor disabled

• 5 ft (1.5 m)

• 10 ft (3 m) (factory default)

• 20 ft (6 m)

➡️ Select the distance that best fits your space.

How it works:

• Light turns on when motion is detected in the dark

• Light turns off automatically after no motion is detected

---

6. Installation

Installing the Lights

1. Attach the metal plate to the back of the light.

2. Peel the backing from the 3M adhesive.

3. Press firmly onto a clean, smooth surface.

4. The light will magnetically attach to the plate.

---

Installing the Remote

1. Attach the round metal plate to the back of the remote.

2. Use the 3M adhesive to mount it near the lights.

---

7. Safety & Use Information

• Indoor use only

• Built-in rechargeable battery (non-replaceable)

• Do not disassemble

• Do not expose to water

• Operating temperature: -20°C to 54°C (-4°F to 129°F)

Looking for more details? Find your product and download the full manual here: Infinity X1 Product Manuals.