🔦 User Guide – Infinity X1 3500L Flashlight – Infinity X1

🔦 Product Overview

Thank you for choosing the Infinity X1 3500 Lumen Dual Power Flashlight – a powerful, hybrid solution for everyday use, outdoor adventures, and emergencies. This flashlight features USB-C rechargeable and alkaline battery compatibility, multiple brightness modes, and a weather-resistant design.

⚙️ Key Features

Up to 3500 Lumens of LED brightness
Dual Power: Rechargeable or 4× AA alkaline batteries
5 Lighting Modes: Eco, Low, Medium, High, Off
USB-C Charging (Cord included)
USB-C OUT to charge external devices
Weather Resistant (IPX4)
Power Lock Mode to prevent accidental activation

🔋 Battery & Power Options

Mode	Power Type	Lumens	Runtime	Beam Distance	Candela
High	Rechargeable	3500	2h	210m	11000 cd
High	Alkaline	900	2h	110m	3000 cd
Medium	Rechargeable	2000	3h	160m	6400 cd
Medium	Alkaline	700	3h	90m	2000 cd
Low	Rechargeable	1000	5h	110m	3000 cd
Low	Alkaline	500	4h	80m	1600 cd
Eco	Rechargeable	200	24h	50m	600 cd
Eco	Alkaline	200	8h	50m	600 cd

🔌 Charging Instructions

Rechargeable Battery

The USB-C charging port is located at the bottom of the flashlight base, underneath the rubber port cover.

USB-C IN (Red port) – Charge the flashlight's battery
USB-C OUT (Black port) – Charge your phone or other devices

💡 You can also remove the battery pack from the flashlight and charge it externally using the same port.

Use the included USB-C cable (included) and connect to a 5V/1A charging cube (not included).

🔓 Power Lock Mode

To prevent battery drain, Power Lock is ON at time of purchase.

To unlock:

Press and hold the power button for 3 seconds
Flashlight will turn on and exit lock mode

To re-enable lock mode: Hold the button again for 3 seconds when powered off.

🔁 How to Use Light Modes

Press the power button to cycle through modes:

Eco – 1 press
Low – 2 presses
Medium – 3 presses
High – 4 presses
Off – 5 presses

📦 What's Included

- (2) Flashlights
- (2) USB-C Charging Cables
- (2) Alkaline Battery Sticks (each pre-loaded with 3x AAA batteries – batteries included)
- ⚠️ Charging cube/adaptor not included. Use a 5V/1A charging adaptor for best results.

To install:

Unscrew the tail cap
Insert the rechargeable battery OR 3 AA batteries
Make sure polarity (+/-) matches diagram
Screw tail cap back on securely

💧 Durability & Weather Resistance

Water-resistant: IPX4 rated (resists splashes from any direction)
Impact tested: 1 meter drop-resistant

📱 Device Charging

Use the black USB-C OUT port on the rechargeable battery to power small devices.

⚠️ Some phones may require a specific cable to initiate charging.

🔗 Related Articles