⚪️ User Guide – Infinity X1 Anywhere Light (Motion-Activated)

Below is a summary of the key information for your Anywhere Light. You can download the full manual at the bottom of this page for more details.

---

Key Features

• Brightness Modes:
  • Adjustable light output: High, Low, and Off.
• Motion Sensor:
  • Automatically activates the light for 15 seconds when motion is detected.
• Color Temperature:
  • Adjustable between 3000K (warm white) and 6000K (cool white).
• Rechargeable Battery:
  • Built-in, non-replaceable lithium-ion battery.
  • Fully charge the battery before first use.

---

Charging Instructions

1. Plug the USB-C cable into the charging port on the side of the light.
2. Plug the other end into a 5V/1A USB wall adapter (same as most phone chargers).
3. Check the indicator light:
   • Red Light – Charging
   • Green Light – Fully charged
4. Allow the light to charge fully before first use (about 3–4 hours).

---

Installation

1. Mounting Options:
   • Use the included expansion screws for secure installation.
   • Alternatively, use the provided 3M adhesive strip for smooth surfaces (make sure the surface is clean and dry).
2. Placement:
   • Position the light at least 5 feet apart from other motion-activated units for optimal sensor performance.

---

Using the Motion Sensor

• The sensor is built into the plastic casing and designed to be incognito.
• It’s located between the top and bottom lights.
• Make sure it faces the direction where motion is most likely to be detected, such as a doorway or hallway.
• Works best indoors or in covered areas—avoid direct sunlight or rain exposure.

---

Safety Guidelines

• Avoid staring directly into the light when it is on.
• Operate within the temperature range: -20°C to 54°C (-4°F to 129.2°F).
• Do not disassemble or expose the unit to rain or moisture.

---

 

Looking for more details? Find your product and download the full manual here: Infinity X1 Product Manuals.