Step 1: Locate the Charging Port
The work light has two ports under the protective cover:
- IN-Port (USB-C) → Used to charge the work light’s internal battery.
- OUT-Port (USB-A) → Used to charge external devices (phones, tablets, etc.).
📌 Important: The OUT-Port does not charge the work light itself. It only provides power to other small devices.
Step 2: Charging the Work Light
1️⃣ Connect the USB-C Charging Cable
- Insert the USB-C cable into the IN-port of the work light.
- Plug the other end into a standard USB power adapter (recommended: 5V/1A adapter).
2️⃣ Check the LED Charging Indicator
- 🔵 Flashing Blue Lights → Charging in progress.
- 🔵 4 Solid Blue Lights → Fully charged and ready to use.
⏳ Charging Time: Approximately 4-6 hours for a full charge.
Step 3: Using the Work Light While Charging
- The work light can be used while charging, but it may take longer to reach full charge.
- If the battery is completely drained, allow it to charge for at least 15-30 minutes before turning it on.
Using the Work Light After Charging
Once fully charged, you can use the work light in different brightness modes:
- High Mode – Maximum brightness for full illumination.
- Medium Mode – Balanced brightness for extended use.
- Low Mode – Dim light for power conservation.
- Strobe Mode – Flashing light for safety or signaling.
To switch between brightness levels, press the power button.
🎵 Using the Bluetooth Speaker
1️⃣ Turn on the speaker mode by pressing and holding the Bluetooth button.
2️⃣ Pair the speaker with your mobile device via Bluetooth settings.
3️⃣ Adjust volume using your mobile device.
🔹 Speaker Battery Life: The speaker shares power with the work light. Using both simultaneously may reduce battery life.
Troubleshooting Charging Issues
🔹 No Blue Lights While Charging?
✔ Try a different USB-C cable and adapter.
✔ Ensure the cable is fully inserted into the IN-port (not the OUT-port).
🔹 Work Light Won’t Hold a Charge?
✔ Charge the battery fully until all 4 blue lights are solid.
✔ If the issue persists, you may need warranty support (see below).
🔹 Battery Drains Too Quickly?
✔ Using the Bluetooth speaker and light at the same time will drain the battery faster.
✔ Lower the brightness mode for longer runtime.
🔗 Related Articles & Help
📌 📝 Register Your Work Light for Warranty Coverage → How to Register Your Product
📌 🔍 Need Help Finding Your Item Number? → Find Your Item Number
📌 📜 Warranty & Replacement Policy → Check Warranty Options
📌 ⚠️ Work Light Not Turning On? → Troubleshooting Fixes
Comments
0 comments
Article is closed for comments.